The Mitsubishi Lancer is a popular car model known for its reliability and performance. However, like any other vehicle, it requires regular maintenance to ensure its optimal functioning. One of the most critical components that need attention is the brake pads. Worn-out brake pads can lead to reduced braking performance, increased stopping distance, and even accidents. Therefore, it is essential to learn how to change brake pads on your Mitsubishi Lancer to ensure your safety on the road.
Overview
This guide provides a step-by-step procedure on how to change brake pads on your Mitsubishi Lancer. The process is relatively straightforward and can be completed with basic tools and some mechanical knowledge. The guide covers the following topics:
-
Tools and materials needed
-
Removing the wheels and caliper
-
Removing the old brake pads
-
Installing the new brake pads
-
Reassembling the caliper and wheels
By following this guide, you will be able to change your brake pads like a professional mechanic and enjoy improved braking performance and peace of mind on the road.
Why Change Brake Pads?
Brake pads are designed to wear out over time, and neglecting to replace them can lead to serious consequences. Here are some reasons why you should change your brake pads:
-
Improved braking performance
-
Increased safety
-
Reduced stopping distance (See Also: How To Fwd Trail Brake)
-
Prevention of costly repairs
In the next section, we will provide a detailed guide on how to change brake pads on your Mitsubishi Lancer. If you have any questions or concerns, feel free to ask in the comments section.
How to Change Brake Pads Mitsubishi Lancer: A Step-by-Step Guide
The Mitsubishi Lancer is a popular car model known for its reliability and performance. However, like any other vehicle, it requires regular maintenance to ensure optimal performance and safety. One of the most critical components of a car’s braking system is the brake pads. Over time, brake pads wear out and need to be replaced to prevent damage to other components and ensure safe braking. In this article, we will provide a step-by-step guide on how to change brake pads on a Mitsubishi Lancer.
Tools and Materials Needed
To change brake pads on a Mitsubishi Lancer, you will need the following tools and materials:
- Brake pads (new)
- Brake lubricant
- Brake cleaner
- Screwdriver
- Wrench
- Pliers
- Brake pad wear sensor (if equipped)
Step 1: Jack Up the Car and Remove the Wheel
To access the brake pads, you need to jack up the car and remove the wheel. Make sure the car is on a level surface and apply the parking brake. Locate the jacking points on the car and position the jack accordingly. Raise the car until the wheel is off the ground, but not so high that the car is unstable.
Remove the wheel using a lug wrench and set it aside. Make sure to loosen the lug nuts before removing the wheel, but do not remove them completely.
Step 2: Remove the Caliper
The caliper is the component that holds the brake pads in place. To remove it, you need to loosen the caliper bolts using a wrench. Remove the caliper bolts and slide the caliper off the rotor. Be careful not to damage the brake hose or ABS sensor wires.
Use a piece of wire or a rubber band to hold the caliper out of the way, allowing you to access the brake pads.
Step 3: Remove the Old Brake Pads
Use a screwdriver or pliers to remove the old brake pads from the caliper. The pads are held in place by clips or springs, so be careful not to damage them. Remove the old brake pads and set them aside.
Inspect the brake pads for wear and damage. If they are excessively worn or damaged, it may be necessary to replace them with new ones. (See Also: Mini Cooper Rear Brake Pad Replacement Cost)
Step 4: Install the New Brake Pads
Take the new brake pads and insert them into the caliper. Make sure they are properly seated and the clips or springs are securely fastened.
Apply a small amount of brake lubricant to the back of the brake pads and the caliper. This will help the pads move smoothly and prevent noise and vibration.
Step 5: Reinstall the Caliper
Slide the caliper back over the rotor and reattach it using the caliper bolts. Tighten the bolts in a star pattern to ensure even pressure.
Make sure the caliper is properly seated and the brake pads are not damaged.
Step 6: Bleed the Brake System
After replacing the brake pads, it is necessary to bleed the brake system to remove any air that may have entered the lines. This will ensure the brakes function properly and prevent any spongy feeling.
Use a brake bleeding kit and follow the manufacturer’s instructions to bleed the brake system.
Step 7: Reinstall the Wheel and Lower the Car
Reinstall the wheel and tighten the lug nuts in a star pattern. Lower the car to the ground using the jack.
Check the brake pads and caliper to ensure they are properly installed and the brakes are functioning properly.
Conclusion
Changing brake pads on a Mitsubishi Lancer is a relatively simple process that can be done at home with the right tools and materials. By following the steps outlined in this article, you can ensure your brakes are functioning properly and safely.
Remember to always refer to your owner’s manual for specific instructions and guidelines for your particular vehicle. If you are not comfortable with this process, it is recommended to consult a professional mechanic.
Key Points to Remember
Here are the key points to remember when changing brake pads on a Mitsubishi Lancer: (See Also: How Many Millimeters To Replace Brake Pads)
- Jack up the car and remove the wheel to access the brake pads
- Remove the caliper and slide it off the rotor
- Remove the old brake pads and inspect them for wear and damage
- Install the new brake pads and apply brake lubricant
- Reinstall the caliper and tighten the bolts
- Bleed the brake system to remove any air
- Reinstall the wheel and lower the car
Recap
In this article, we have provided a step-by-step guide on how to change brake pads on a Mitsubishi Lancer. By following these steps, you can ensure your brakes are functioning properly and safely. Remember to always refer to your owner’s manual for specific instructions and guidelines for your particular vehicle. If you are not comfortable with this process, it is recommended to consult a professional mechanic.
Here are five FAQs related to “How To Change Brake Pads Mitsubishi Lancer”:
Frequently Asked Questions
Q: What tools do I need to change the brake pads on my Mitsubishi Lancer?
You will need a few basic tools to change the brake pads on your Mitsubishi Lancer. These include a socket wrench, a C-clamp, and a pair of gloves. You may also need to purchase a brake pad wear sensor if your vehicle is equipped with one. It’s a good idea to consult your owner’s manual or a repair manual for specific instructions and recommendations.
Q: How do I access the brake pads on my Mitsubishi Lancer?
To access the brake pads on your Mitsubishi Lancer, you will need to remove the wheel and the caliper. Start by loosening the lug nuts on the wheel with a socket wrench and then lift the wheel off the hub. Next, use a C-clamp to compress the caliper and slide it off the rotor. This will give you access to the brake pads.
Q: How do I remove the old brake pads from my Mitsubishi Lancer?
To remove the old brake pads from your Mitsubishi Lancer, you will need to pull them out of the caliper. Start by prying the pads out of the caliper with a flathead screwdriver or a brake pad removal tool. Be careful not to damage the caliper or the pads. Once the pads are removed, you can discard them and install the new ones.
Q: How do I install the new brake pads on my Mitsubishi Lancer?
To install the new brake pads on your Mitsubishi Lancer, simply slide them into the caliper and make sure they are securely seated. Make sure the pads are properly aligned and that the wear sensors are properly seated. Then, use a C-clamp to compress the caliper and slide it back over the rotor. Finally, tighten the lug nuts on the wheel and check the brake pads to make sure they are properly seated.
Q: How do I bleed the brake system after changing the brake pads on my Mitsubishi Lancer?
To bleed the brake system after changing the brake pads on your Mitsubishi Lancer, you will need to use a brake bleeding kit. Start by attaching the kit to the brake line and then pump the brake pedal several times to remove any air from the system. Check the brake fluid level and top it off as needed. Finally, test the brakes to make sure they are functioning properly.
