The brake light is an essential safety feature in any vehicle, and it’s crucial to ensure it’s functioning properly to avoid any potential risks on the road. If your Astra 2017’s brake light is not working, it’s essential to replace it as soon as possible. In this article, we will guide you through the process of how to change the brake light on your Astra 2017.
Why Replace the Brake Light?
A faulty brake light can lead to serious consequences, including fines, penalties, and even accidents. If your brake light is not functioning properly, it can be difficult for other drivers to notice when you’re slowing down or stopping, which can increase the risk of a collision. Replacing the brake light is a relatively simple process that can be done at home, and it’s essential to do so to ensure your safety and the safety of others on the road.
Tools and Materials Needed
To replace the brake light on your Astra 2017, you’ll need the following tools and materials:
- A replacement brake light bulb
- A screwdriver
- A Torx screwdriver
- A plastic trim removal tool
Step-by-Step Guide
In this section, we’ll provide a step-by-step guide on how to change the brake light on your Astra 2017. Please note that the process may vary depending on the trim level and model of your vehicle.
How To Change Brake Light On Astra 2017
If your brake light is not functioning properly, it’s essential to replace it as soon as possible to ensure your safety and the safety of other drivers on the road. In this article, we will guide you through the process of changing the brake light on a 2017 Astra.
Tools and Materials Needed
To change the brake light on your 2017 Astra, you will need the following tools and materials:
- A new brake light bulb (available at most auto parts stores)
- A screwdriver (preferably a Torx screwdriver)
- A wrench or pliers
- A cloth or paper towel for cleaning
Step 1: Locate the Brake Light Bulb
The brake light bulb is located on the rear of the vehicle, on the trunk lid. To access it, you will need to remove the trunk lid trim.
Start by opening the trunk lid and removing the trim pieces that cover the hinges. You will see a series of screws that hold the trim in place. Remove these screws using your screwdriver.
Next, pull the trim pieces away from the trunk lid and set them aside. You should now see the brake light bulb and the surrounding area.
Step 2: Remove the Brake Light Lens
The brake light lens is held in place by a series of clips and screws. To remove it, you will need to release these clips and remove the screws. (See Also: Can You Resurface Brake Pads)
Start by releasing the clips that hold the lens in place. You can do this by gently prying them open with your fingers or a flathead screwdriver.
Once the clips are released, you can remove the screws that hold the lens in place. Use your screwdriver to remove these screws.
With the screws removed, you should be able to lift the lens off the bulb. Be careful not to touch any of the surrounding electrical components.
Step 3: Remove the Old Brake Light Bulb
The old brake light bulb is held in place by a series of clips and a retaining ring. To remove it, you will need to release these clips and remove the retaining ring.
Start by releasing the clips that hold the bulb in place. You can do this by gently prying them open with your fingers or a flathead screwdriver.
Once the clips are released, you can remove the retaining ring that holds the bulb in place. Use your wrench or pliers to remove this ring.
With the retaining ring removed, you should be able to pull the old bulb out of the socket. Be careful not to touch any of the surrounding electrical components.
Step 4: Install the New Brake Light Bulb
The new brake light bulb should come with a new retaining ring and clips. Make sure to install these correctly to ensure a secure fit.
Start by installing the new retaining ring. Use your wrench or pliers to secure it in place.
Next, install the new bulb in the socket. Make sure it is seated properly and the clips are securely in place. (See Also: How To Adjust Shimano Hydraulic Disc Brake Levers)
Step 5: Reassemble the Brake Light
Now that the new bulb is installed, you can reassemble the brake light. Start by replacing the retaining ring and clips.
Next, replace the lens. Make sure it is securely fastened in place with the screws and clips.
Finally, replace the trunk lid trim and screw it back into place.
Step 6: Test the Brake Light
Once you have reassembled the brake light, test it to make sure it is functioning properly.
Turn on the ignition and test the brake light by pressing the brake pedal. The light should illuminate when the brake pedal is pressed.
If the light does not illuminate, check the bulb and make sure it is properly installed. If the problem persists, you may need to consult a professional mechanic.
Conclusion
Changing the brake light on your 2017 Astra is a relatively simple process that can be completed with the right tools and a little bit of patience. By following the steps outlined in this article, you should be able to replace the brake light bulb and get back on the road safely.
Recap
In this article, we covered the following steps to change the brake light on a 2017 Astra:
- Locate the brake light bulb
- Remove the brake light lens
- Remove the old brake light bulb
- Install the new brake light bulb
- Reassemble the brake light
- Test the brake light
We hope this article has been helpful in guiding you through the process of changing the brake light on your 2017 Astra. If you have any further questions or concerns, please don’t hesitate to contact us. (See Also: My Tire Shakes When I Brake)
Here are five FAQs related to “How To Change Brake Light On Astra 2017”:
Frequently Asked Questions
Q: What tools do I need to change the brake light on my 2017 Astra?
You will need a screwdriver, a Torx screwdriver, and a replacement brake light bulb. It’s also a good idea to have a pair of gloves and safety glasses to protect yourself from any sharp edges or debris.
Q: How do I access the brake light bulb on my 2017 Astra?
To access the brake light bulb, you’ll need to remove the trim panel on the rear of the car. Start by removing the screws that hold the panel in place, then gently pry the panel away from the car. You’ll see the brake light bulb located at the back of the panel.
Q: Can I change the brake light bulb myself, or should I take it to a mechanic?
If you’re comfortable with DIY car repairs and have experience with electrical systems, you can change the brake light bulb yourself. However, if you’re not sure what you’re doing or feel uncomfortable with the process, it’s recommended to take your car to a professional mechanic.
Q: How long does it take to change the brake light bulb on my 2017 Astra?
The process of changing the brake light bulb on your 2017 Astra should take around 30-60 minutes, depending on your level of experience and the tools you have available. If you’re doing it for the first time, it may take longer.
Q: What happens if I accidentally break the brake light bulb or damage the surrounding wiring?
If you accidentally break the brake light bulb or damage the surrounding wiring, you may need to replace the bulb or have the wiring repaired by a professional mechanic. In some cases, the entire electrical system may need to be replaced, which can be a more expensive and time-consuming process. To avoid this, make sure to handle the bulb and wiring with care and follow proper safety precautions when working with electrical systems.
