The brake pads on your 2019 Kia Sorento are one of the most critical safety components of your vehicle. They play a vital role in ensuring your safety on the road by allowing you to stop your vehicle quickly and efficiently. Over time, the brake pads can wear out, which can lead to a loss of braking performance and potentially cause accidents. Replacing the brake pads is a relatively simple process that you can do yourself with the right tools and instructions.
Why Change Brake Pads?
Brake pads wear out over time due to normal use and can cause a number of problems if not replaced. Some of the common signs of worn-out brake pads include:
- Squealing or grinding noises when you press the brake pedal
- A spongy or soft brake pedal
- A vibrating or pulsing sensation when you brake
- Increased stopping distance
Ignoring worn-out brake pads can lead to more serious problems, such as:
- Damage to the brake rotors
- Increased risk of an accident
- Higher repair costs
Tools and Materials Needed
To change the brake pads on your 2019 Kia Sorento, you will need the following tools and materials:
- Brake pad wear sensors (if equipped)
- New brake pads (compatible with your vehicle)
- Brake lubricant
- Brake cleaner
- Wheel chocks
- Tire iron
- Socket wrench or ratchet and socket set
- Torx screwdriver (for caliper bolts)
Step-by-Step Instructions
This guide will walk you through the step-by-step process of changing the brake pads on your 2019 Kia Sorento. Please follow along carefully to ensure a successful and safe repair.
How To Change Brake Pads On 2019 Kia Sorento
The 2019 Kia Sorento is a reliable and safe vehicle, but like any other vehicle, it requires regular maintenance to ensure optimal performance. One of the most important maintenance tasks is replacing the brake pads. In this article, we will guide you through the process of changing brake pads on your 2019 Kia Sorento.
Tools and Materials Needed
To change the brake pads on your 2019 Kia Sorento, you will need the following tools and materials:
- Brake pad wear sensor (if equipped)
- Brake pad retaining clips
- Brake pad shims
- Brake fluid
- Torque wrench
- Socket set
- Brake pad wear gauge
Step 1: Jack Up the Vehicle and Remove the Wheel
To access the brake pads, you need to jack up the vehicle and remove the wheel. Here’s how:
1. Find a level surface and apply the parking brake.
2. Locate the jacking points on the vehicle. For the 2019 Kia Sorento, the jacking points are located near the front and rear wheels.
3. Position the jack under the vehicle and raise it until the wheel is off the ground.
4. Remove the wheel by loosening the lug nuts with a socket wrench.
5. Carefully pull the wheel straight off the hub and set it aside.
Step 2: Remove the Caliper
The caliper is the metal component that holds the brake pads in place. To remove it, you need to loosen the caliper bolts: (See Also: Whats A Coaster Brake)
1. Locate the caliper bolts, which are usually located on the back of the caliper.
2. Loosen the caliper bolts with a socket wrench. Be careful not to remove them completely.
3. Use a piece of wire or a rubber band to hold the caliper in place, allowing you to slide it off the rotor.
Step 3: Remove the Old Brake Pads
Now it’s time to remove the old brake pads:
1. Locate the brake pad retaining clips, which hold the brake pads in place.
2. Remove the clips by prying them off with a flathead screwdriver.
3. Gently pull the old brake pads out of the caliper.
Step 4: Inspect and Clean the Caliper and Rotor
Before installing the new brake pads, inspect the caliper and rotor for any debris or corrosion:
1. Inspect the caliper for any signs of corrosion or damage.
2. Clean the caliper with a wire brush or a cloth.
3. Inspect the rotor for any signs of wear or corrosion.
4. Clean the rotor with a wire brush or a cloth.
Step 5: Install the New Brake Pads
Now it’s time to install the new brake pads:
1. Take the new brake pads and insert them into the caliper, making sure they are properly seated. (See Also: How To Release The Parking Brake)
2. Replace the brake pad retaining clips, making sure they are securely fastened.
3. Repeat the process for the other brake pad.
Step 6: Reinstall the Caliper
Now it’s time to reinstall the caliper:
1. Slide the caliper back over the rotor, making sure it is properly seated.
2. Tighten the caliper bolts in a star pattern to ensure even pressure.
3. Make sure the caliper is securely fastened to the rotor.
Step 7: Bleed the Brake System
After installing the new brake pads, it’s a good idea to bleed the brake system to remove any air that may have entered the system:
1. Locate the brake fluid reservoir and check the fluid level.
2. If the level is low, add brake fluid to the reservoir.
3. Use a brake bleeding kit to remove any air from the system.
Step 8: Reinstall the Wheel and Lower the Vehicle
Finally, it’s time to reinstall the wheel and lower the vehicle:
1. Place the wheel back onto the hub and hand tighten the lug nuts.
2. Lower the vehicle to the ground using the jack. (See Also: Where Can I Dispose Of Brake Fluid)
3. Tighten the lug nuts in a star pattern to ensure even pressure.
Recap
Changing the brake pads on your 2019 Kia Sorento is a relatively straightforward process. By following these steps, you can ensure that your vehicle is safe and reliable on the road. Remember to always refer to your owner’s manual for specific instructions and to consult a professional mechanic if you are unsure about any part of the process.
Key Points:
* Make sure to jack up the vehicle and remove the wheel to access the brake pads
* Loosen the caliper bolts and slide the caliper off the rotor
* Remove the old brake pads and inspect the caliper and rotor for debris or corrosion
* Install the new brake pads and replace the brake pad retaining clips
* Reinstall the caliper and tighten the caliper bolts
* Bleed the brake system to remove any air
* Reinstall the wheel and lower the vehicle to the ground
Here are five FAQs related to “How To Change Brake Pads On 2019 Kia Sorento”:
Frequently Asked Questions
What Tools Do I Need to Change Brake Pads on My 2019 Kia Sorento?
To change brake pads on your 2019 Kia Sorento, you will need a few basic tools, including a socket wrench, a C-clamp, and a pair of gloves. You may also want to consider investing in a brake pad wear gauge to help you measure the thickness of your brake pads. Make sure to consult your owner’s manual for specific recommendations on tools and procedures.
How Do I Jack Up My 2019 Kia Sorento to Access the Brake Pads?
To jack up your 2019 Kia Sorento, locate the jacking points on the frame of the vehicle. These points are marked with a picture of a car and a jack. Place the jack on the jacking point and raise the vehicle until the brake caliper is accessible. Make sure to use jack stands for added safety and support.
How Do I Remove the Caliper to Access the Brake Pads?
To remove the caliper, loosen the caliper bolts using a socket wrench. Then, pull the caliper off the rotor and set it aside. Be careful not to damage the brake hose or ABS sensor wires. You may need to use a little bit of force to remove the caliper, but be gentle to avoid damaging any surrounding components.
How Do I Remove the Old Brake Pads and Install the New Ones?
To remove the old brake pads, pull them out of the caliper and set them aside. Then, take the new brake pads and insert them into the caliper, making sure they are properly seated and aligned. Make sure to install the new brake pads in the correct orientation, with the wear indicator facing the correct direction.
How Do I Bleed the Brake System After Changing the Brake Pads?
To bleed the brake system, you will need to use a brake bleeding kit and a set of brake fluid. Start by attaching the bleeding kit to the brake caliper and pumping the brake pedal several times to remove any air from the system. Then, open the bleeding kit and allow the brake fluid to flow out. Repeat this process until the brake fluid is clear and free of air bubbles. Make sure to consult your owner’s manual for specific recommendations on bleeding the brake system.
